TOOLS & RESOURCES

Tools & Resources

Product Life CalculationTechnical UpdatesTroubleshootingInstallation & Maintenance Guide
Motor-Bracket Interface Checks After Servo Motor Replacement Image

Motor-Bracket Interface Checks After Servo Motor Replacement

Check motor pilots, mounting holes, shaft extensions and coupling space after a servo replacement, using a tolerance-stack example and a practical acceptance record.

View Details
Ball Screw Shaft-End Dimensions and Support Unit Matching Image

Ball Screw Shaft-End Dimensions and Support Unit Matching

Match a ball screw to its support unit by checking bearing journals, shoulders, threads and coupling extensions, with verified HZMotion BK-series examples.

View Details
Accuracy Parameters and Inspection Methods for Linear Actuators and Worktables Image

Accuracy Parameters and Inspection Methods for Linear Actuators and Worktables

Understand resolution, repeatability, positioning error and travel geometry, with bidirectional examples, HZMotion catalog data and an inspection template.

View Details
Disc and Jaw Coupling Selection for Linear Actuators Image

Disc and Jaw Coupling Selection for Linear Actuators

Compare disc and jaw couplings for linear actuators: torsional stiffness, damping, torque and alignment, with a worked example and installation checklist.

View Details
Linear Actuator Lubrication Intervals and Maintenance Planning Image

Linear Actuator Lubrication Intervals and Maintenance Planning

Plan linear actuator lubrication by component, travel and condition. Includes HZMotion manual guidance, a mileage example and a practical maintenance log.

View Details
Short-Stroke Cycle Time and Settling Time Analysis Image

Short-Stroke Cycle Time and Settling Time Analysis

Calculate short-stroke cycle time with a 50 mm example. Compare motion profiles, settling, process and waiting time using charts and a measurement checklist.

View Details
Corrosion Protection for Support Units, Motor Brackets and Nut Brackets Image

Corrosion Protection for Support Units, Motor Brackets and Nut Brackets

Match corrosion protection to humidity, coolant and cleaning. Includes surface-treatment checks, a coating-thickness example and an enquiry checklist.

View Details
Offset Loads and Three-Axis Moment Analysis for Linear Actuators Image

Offset Loads and Three-Axis Moment Analysis for Linear Actuators

Calculate roll, pitch and yaw from payload position, gravity and acceleration. A 20 kg worked example compares motion stages and geometry, with catalog-rating checks.

View Details
Operating Loads and Life Assessment of Ball Screw Support Units Image

Operating Loads and Life Assessment of Ball Screw Support Units

Assess support-unit loads and life using a revolution-weighted duty cycle. Includes a worked bearing-life example, rating definitions and engineering checks.

View Details
Radial, 30-Degree or Axial Locking? Selecting NRA, NR, NF and NK Locknuts Image

Radial, 30-Degree or Axial Locking? Selecting NRA, NR, NF and NK Locknuts

Compare NRA, NR, NF and NK locking access, M20×1.0 body dimensions, seating interfaces and service clearance. Includes a selection sequence and RFQ checklist.

View Details