Accuracy Parameters and Inspection Methods for Linear Actuators and Worktables
Understand resolution, repeatability, positioning error and travel geometry, with bidirectional examples, HZMotion catalog data and an inspection template.
View DetailsTools & Resources
Disc and Jaw Coupling Selection for Linear Actuators
Compare disc and jaw couplings for linear actuators: torsional stiffness, damping, torque and alignment, with a worked example and installation checklist.
View Details
Linear Actuator Lubrication Intervals and Maintenance Planning
Plan linear actuator lubrication by component, travel and condition. Includes HZMotion manual guidance, a mileage example and a practical maintenance log.
View Details
Short-Stroke Cycle Time and Settling Time Analysis
Calculate short-stroke cycle time with a 50 mm example. Compare motion profiles, settling, process and waiting time using charts and a measurement checklist.
View Details
Corrosion Protection for Support Units, Motor Brackets and Nut Brackets
Match corrosion protection to humidity, coolant and cleaning. Includes surface-treatment checks, a coating-thickness example and an enquiry checklist.
View Details
Offset Loads and Three-Axis Moment Analysis for Linear Actuators
Calculate roll, pitch and yaw from payload position, gravity and acceleration. A 20 kg worked example compares motion stages and geometry, with catalog-rating checks.
View Details
Operating Loads and Life Assessment of Ball Screw Support Units
Assess support-unit loads and life using a revolution-weighted duty cycle. Includes a worked bearing-life example, rating definitions and engineering checks.
View Details
Radial, 30-Degree or Axial Locking? Selecting NRA, NR, NF and NK Locknuts
Compare NRA, NR, NF and NK locking access, M20×1.0 body dimensions, seating interfaces and service clearance. Includes a selection sequence and RFQ checklist.
View Details
Why Repeated Locknut Tightening Can Cause Problems: Thread, Seating and Locking Checks
Separate main-nut clamping from secondary locking. Diagnose nut movement, axial play and increased starting torque with thread, seating and acceptance checks.
View Details
Open or Closed Nut Bracket? Checking MC, MGD, MGS and NH Interfaces
Compare MC, MGD, MGS and NH nut brackets. Check six interfaces, see why MC2020 suffixes matter, and prepare complete drawings and purchasing requirements.
View Details